When you see this sewing trick, you’ll be surprised; you’ve probably never thought about it. Let’s find out what it is; you’ll find out!
Sewing tip
Do you often use your sewing machine and want to make thread cutting more efficient and effective? Well, with this ingenious trick, you can easily achieve this goal and achieve quick and efficient thread cutting without any effort. Making a thread cutter in just a few minutes is possible, and you can quickly attach it to your sewing machine—here’s how!
The thread cutter for sewing machines
The sewing machine thread cutter often fails to perform as expected and prevents you from using it properly. Depending on the thread tension, it can break, but if the thread cutter isn’t effective, you’re wasting time and accomplishing nothing.
Sewing tip
The thread coming from the spool could break because the tension of the underlying thread is very high. But what to do in these cases? The most obvious solution would be to tighten the screw of the capsule and pull on the thread to check the tension level .
However, it can happen that even in this case, the thread breaks and prevents you from doing the job in the best possible way. The stitch may also be longer or slower and affect the result. Or maybe the thread cutter on the sewing machine is not there at all. So , what to do in these cases ? Here is a tip to solve the problem, quickly and practically!
Create a new wire cutter
To make a floss cutter, you’ll need to get an empty box of dental floss, which is readily available. Or, if you also use dental floss, save the box when it’s used up so you can reuse it . Here’s how:
Take an empty container of dental floss, open it and you will see that inside is the spool where the dental floss is usually wound, which should be empty;
On top of the box there is a metal hook , where you pass the dental floss to cut it to the desired length;
Once the box is open, use a cutter to open the plastic part on the sides by making a small cut;
Once the side pieces are open, continue with the cutter and completely separate the top piece from the rest of the box, detaching it completely. It will feel like you are holding in your hands the piece usually found under the needle of sewing machines, with a small hole on one side and the metal foot on the other;
Finish the small hole well with a pair of scissors then screw the piece of box into the part of the machine where the needle is located, just above the head;
Take a screw and screw the piece of box into the hole, then start working with the sewing machine again.
You will see that the sewing machine will do its job at its best and you will no longer have any problems.
sew
No more waste with wire cutters
After creating the thread cutter for the sewing machine and thus saving yourself from wasting a lot of thread, you will see the savings that this solution will bring you . You will use the right amount of thread to do the job with the machine, without throwing away even a piece and using the right one you need.
This solution will save you significant money over time and you will have solved a very common problem that many people don’t know how to solve.
Follow this valuable advice and share it with others to give them the opportunity to use their sewing machine without waste. Given the economic crisis, it’s important to save money today, and that starts with small things, like sewing thread.
If it breaks and you can’t work with it, you’ll throw away huge amounts of it and have to buy it again. This way, the wire will last much longer and you can save a lot of money!