Silicone, the trick masons use to apply it perfectly, for interior finishes and more, has been revealed.
Put the silicone
Silicone, the trick used by masons to apply it perfectly, has been revealed. Silicone is a material that has been used for years in various fields, from industry to manufacturing. It is a type of material used to seal and protect doors and windows, and to bond and protect mirrors, glass, floors, and showers. In any case, recently, the masons’ trick has been revealed so that it can be applied perfectly.
silicone
Silicone, what kind of material is it?
It is an inorganic polymer and there are many types on the market. These include universal acetone silicone, universal acrylic silicone, and neutral silicone. In all cases, it is a material considered essential for use in interior finishes and much more. Not everyone is able to apply silicone perfectly, so the results will not always be excellent.
As we have already had the opportunity to anticipate , the type of silicone is not all the same, but there are different ones. For example, there is neutral silicone which is distinguished from acetic silicone by its crosslinking.
Neutral silicone is more suitable for specific surfaces, such as mirrors for example.
In this case, the acetic silicone could compromise the glass and therefore the result would not be satisfactory, but would call into question the nature of the object to be treated.
How to apply silicone, the builder’s tip
Silicone, the manufacturer’s trick
Silicone is used for interior finishes and much more. In any case, there are tips for applying it correctly and achieving amazing results. Here’s how to apply silicone correctly, a trick used by masons.
Take the original tip of your silicone and place it in the tube. Then take the silicone gun and draw a horizontal line on a surface, thus spreading the product.
Remove the cap and use a cutter to cut off the end of one tip. After cutting the tip, run another line of product through this new opening, which will be thicker than the previous one. Cut the original silicone tip diagonally and make another row. The product installation should always be uniform and fairly simple.
Now let’s move on to applying the product. If you need to repair or glue something and apply silicone, you know that you usually use your finger to spread it. That’s true, but what not everyone knows is that before running your finger over the silicone, you need to spray it with a little degreaser.
This way, everything will be very clean and the excess product will remain on your site and not on the surface. This way, by using the degreaser first, the product will be perfectly removed.
Another tip . Take some painter’s tape and place the silicone between the two strips of tape. Spray your finger with soapy water and run it directly over the silicone, then remove the tape.
In this case too, the silicone will be perfectly positioned, without any burrs.
Another trick is this: Take some scrap paper, run it over the silicone tip, and run it over the surface you’re interested in.
Now you know the secret to using silicone perfectly.