There’s a trick to saving a lot of money and repairing an LED light. Let’s take a look at the details.
bulb and spoon
Knowing how to repair an LED bulb can save you a lot of money. There are different types of LED bulbs, but they all work the same way. LED bulbs can burn out, but you can repair them with a simple teaspoon.
Knowing how to repair a light bulb is a great way to avoid throwing it away. To recycle an unusable LED bulb, I recommend carefully reading the instructions provided here.
LED lamp features
An LED lamp is characterized by its low consumption, reduced CO2 emissions and high energy efficiency. LED lamps are very sensitive to heat and require constant voltage. It can be said that these lamps last on average between twenty thousand and fifty thousand hours.
Species
LEDs are made from silicon powder and therefore contain harmful substances. The most energy-efficient LED bulbs are fluorescent bulbs, which use about sixty percent less energy than incandescent bulbs.
Generally , the lifespan of an LED bulb depends on the condition of the bulb, build quality, and external factors. To extend the lifespan of an LED bulb, you should set it to operate at 70% of its brightness.
Why LED lights burn out
These energy-saving lamps last longer than conventional bulbs, but can burn out in some cases. A burned-out LED bulb can be identified by the presence of black rings at the base.
Another indicator to check for a burnt-out bulb is the presence of a yellow color near the wire. Sometimes a bulb burns out due to poor quality or manufacturing defects. One cause that can cause an LED lamp to burn out is certainly an increase in voltage .
Unstable electrical voltage eventually burns out and damages LED bulbs. Any exposure to heat or cold sources can cause failures and compromise the lifespan of these bulbs. LED lighting systems, while economical and efficient, require low or constant voltage to operate and not burn out.
It must be said that turning an LED bulb on and off too frequently can eventually cause it to burn out. Even with a faulty or broken lamp socket, the LEDs in the bulb can burn out.
lamp
Tip to repair an LED lamp and save money
There’s a simple trick to repair a burnt-out LED bulb yourself . The first thing to do is take a teaspoon and remove the bulb by simply prying the lantern part. An LED bulb has a claw structure, which can be glued with silicone.
Inside a bulb of this type are different LEDs connected to each other. Different LED lamps have a number of LEDs, but all are connected in series. Once the bulb is open, the fault must be identified. Usually, if an LED bulb burns out, it is because an LED explodes . It only takes one LED to stop working for the LED circuit to stop working.
As soon as an LED stops working , the circuit breaks and the electric current stops. After identifying the faulty LED , where there is a black dot, it must be repaired. To repair the blown LED, simply take the teaspoon and scrape the broken LED.
Where the aluminum plate is located, the LED circuit ends and must therefore be assembled by soldering. Solder is used to establish a direct connection . At this point, the spoon handle must be heated, either on the stove or with a lighter. Then, the heated spoon is placed on the solder to be dissolved. Once this is done, you must check if the repaired bulb lights up and works again.